KOR
ENG
Home / Product / Detail page
QC Slide for ADAM™ CellT Plus
QC Slide is used
- To provide absolute particle numbers
- To calibrate the automatic focus
- To check the position of the slide stage
1) Activate the ADAM™ CellT Plus QC mode using QC slide lot number and activation code.
2) Please register the QC Slide lot in the ‘QC’ tab QC slide Edit.
3) Insert the QC Slide and operate the instrument.
4) Check the result on the ADAM™ CellT Plus QC mode screen or test report.
How to correctly insert QC Slide
Make sure to insert the QC Slide correctly following the direction of arrow.
Data Analysis
1) The result of performance test2 should meet the ‘Acceptance range' in the QC slide.
(Example: 1.80E5 ~ 2.20E6 /mL)
2) Acceptance peak size check. (ADAM™ CellT Plus peak graph value: 13 ~16 μm).
a. Click the ‘QC’ tab-‘SAVE’ or ‘MAIL’ button on ADAM-CellT Plus screen.
b. Check the QC Slide peak size (See Cell Size Information) in the exported ADAM™ CellT Plus test report.
FOR RESEARCH USE ONLY.
This product is not approved for diagnostic or therapeutic use.
-
Product name / Cat. No.
QCS–002
-
Acceptance range
1.8 × 10E6–2.2 × 10E6/mL
-
Acceptance slide peak size
13–16 μm
-
Dimensions
74.9 mm (W) x 24.9 mm (D) x 2.0 mm (H)
-
Expiration date
1 year
Related downloads Total 1
-
ADAM-CellT Plus QC Slide_Manual_NanoEntek
ExTransfection™ Protocol Library
ExTransfection™ provides open protocols that make it easy for users to set up and run experiments. Its 24-well optimization method helps users to optimize transfection protocols easily and quickly.
ExTransfection™ also offers a pre-programmed optimization protocol that helps an easy and quick optimization of electrical parameters for both adherent and suspended cells.
